1 2 3 Previous Next 57 Replies Latest reply: Jul 23, 2014 2:59 PM by merlynn9 RSS

    Failure of Droid Razr Maxx bluetooth connecting to PC

    delenamc

      I can get the phone to pair with my pc via bluetooth but it cannot load the appropriate drivers and fails to connect. What's the fix?

        • 1. Re: Failure of Droid Razr Maxx bluetooth connecting to PC
          B33

          On issue it's probably best using the USB Cable to connect and set up Your drivers..

          • 3. Re: Failure of Droid Razr Maxx bluetooth connecting to PC
            delenamc

            Thanks. I’ll check this out when I get a few minutes. It looks fairly involved.

            • 4. Re: Failure of Droid Razr Maxx bluetooth connecting to PC
              delenamc

              This did not work. Drivers download but cannot install. That’s the same thing that happens when I pair them.

              • 5. Re: Failure of Droid Razr Maxx bluetooth connecting to PC
                delenamc

                That doesn’t work. Drivers download but fail to properly install.

                • 6. Re: Failure of Droid Razr Maxx bluetooth connecting to PC
                  B33

                  Have a Look at these Instructions and see if they can Help Ya..  b33

                   

                   

                   

                   

                   

                  Your phone can connect to other devices wirelessly, using Stereo Bluetooth® technology Class 2, v4.0 LE + EDR  technology with several Bluetooth® Profiles.

                  Quick links

                  Instructions for Android 4.X (Ice Cream Sandwich) users

                  Turn on and connect to a Bluetooth device  

                  Reconnect devices

                  Disconnect devices  

                  Changing the phone name  

                  Supported Bluetooth Profiles

                  MotoSpeak FAQs and information   

                   

                  Turn on and connect to a Bluetooth device

                  To turn on and connect a Bluetooth hands-free headset(s), car kit(s), or other Bluetooth devices:

                  1. On the Home screen, press the Menu key
                  2. Tap Settings
                  3. Tap Wireless & networks
                  4. Touch Bluetooth to turn it On
                  5. Touch Bluetooth settings
                  6. Touch Scan for devices (make sure your device is in pairing mode)
                  7. Your phone scans for available Bluetooth devices
                  8. Touch the Bluetooth device to select it
                  9. Type the PIN if needed (PIN is usually 0000 or 1234)
                  10. Touch the device name again to connect to it. (If it doesn't automatically)

                  Tip: If your device is not connecting to the Bluetooth accessory, it is recommended that you try to reset the Bluetooth device. Check your accessory user guide for reset details.


                  Reconnect devices
                  In order to automatically reconnect your phone with a paired device, simply turn on the device.
                  To manually reconnect your phone with a paired device, touch the device name in the Bluetooth devices list.


                  Disconnect devices
                  In order to automatically disconnect your phone from a paired device, simply turn off the device.
                  To manually disconnect your phone from a paired device, touch the device name in the devices list, then press Menu >Disconnect.


                  Changing the phone nameThe phone name identifies your phone in a Bluetooth network. Default name is usually "Motorola Phone"

                  1. Make sure that you have turned Bluetooth on (See steps above)
                  2. On the Wireless & networks settings screen, touch Bluetooth settings > Device name
                  3. Enter the name for your phone in the dialog box, then touch OK

                  Supported Bluetooth ProfilesYour Motorola DROID RAZR uses Stereo Bluetooth® technology Class 2, v4.0 LE + EDR.The following Bluetooth profiles are supported:
                  • A2DP,
                  • AVRCP,
                  • BIP,
                  • BPP,
                  • DUN,
                  • FTP,
                  • GAP,
                  • GAVDP,
                  • GOEP,
                  • HFP,
                  • HID,
                  • HSP,
                  • OPP,
                  • PAN,
                  • PBAP,
                  • SPP

                  For Android 4.X (Ice Cream Sandwich) users.

                  TURN BLUETOOTH POWER ON OR OFF

                  Touch Menu  > System settings, then touch the Bluetooth power switch to turn it  or .Note: To extend battery life, turn off Bluetooth power when not in use.

                  CONNECT NEW BLUETOOTH DEVICES

                  Note: This feature requires an optional accessory.To connect with a new Bluetooth headset or other device, you need to pair with it. You only need to do this once for each device—to connect again, just turn on the device.
                  1. Make sure the Bluetooth device you are pairing with is in discoverable mode.Note: Refer to the guide that came with the Bluetooth device for details.
                  2. Touch Menu  > System settings > Bluetooth.
                  3. Touch the Bluetooth power switch to turn it  and scan. If Bluetooth power is already on, touch SEARCH FOR DEVICES.
                  4. Touch a device to connect.
                  5. If necessary, touch OK, or enter the device passkey (like 0000) to connect to the device. When the device is connected, the Bluetooth connected indicator  appears in the status bar.

                   

                   

                  Note: Using a mobile device or accessory while driving may cause distraction and may be illegal. Always obey the laws and drive safely.

                   

                  RECONNECT DEVICES

                   

                  To automatically reconnect your smartphone with a paired device, simply turn on the device.

                  To manually reconnect your smartphone with a paired device, touch the device name in the AVAILABLE DEVICES list.

                   

                  DISCONNECT DEVICES

                   

                  To automatically disconnect your smartphone from a paired device, simply turn off the device.

                  To manually disconnect your smartphone from a paired device, touch the device name in the devices list, then touch OK.

                   

                  CHANGE DEVICE NAME

                   

                  Touch Menu  > System settings > Bluetooth, turn Bluetooth power on, then touch Menu  > Rename phone. Enter a name and touch OK.

                  • 7. Re: Failure of Droid Razr Maxx bluetooth connecting to PC
                    delenamc

                    I can pair the two devices without a problem. In that process the pc tells me it is downloading drivers but then I get an error message that installation of the drivers failed. The two devices are not able to connect.

                    • 8. Re: Failure of Droid Razr Maxx bluetooth connecting to PC
                      breezex

                      Uninstall all the drivers for your PC bluetooth device and then re install them afresh. If you do a right click on the "Computer" icon on your desktop and then select "device Manager" are there any flags on devices not operating correctly?  Correct those problems too.

                      • 9. Re: Failure of Droid Razr Maxx bluetooth connecting to PC
                        B33

                        There Not Talking to Each Other) then i would revert to the USB instead...

                        1 2 3 Previous Next